Hi Al,
when querying a Supermicro X8SIL mainboard (IPMI Firmware Rev. 2.05) I have found an issue that the 'CPU1 Temp' and 'CPU2 Temp' OEM sensors cannot currently be interpreted:
# ipmimonitoring
ID | Name | Type | State | Reading | Units | Event
4 | System Temp | Temperature | Critical | -121.00 | C | 'At or Below (<=) Lower Non-Recoverable Threshold'
71 | CPU Temp | OEM Reserved | N/A | N/A | N/A | 'OEM Event = 0000h'
205 | FAN 2 | Fan | Nominal | 5025.00 | RPM | 'OK'
473 | CPU Vcore | Voltage | Nominal | 0.90 | V | 'OK'
540 | +3.3VCC | Voltage | Nominal | 3.38 | V | 'OK'
607 | +12 V | Voltage | Nominal | 11.82 | V | 'OK'
674 | CPU DIMM | Voltage | Nominal | 1.53 | V | 'OK'
741 | +5 V | Voltage | Nominal | 5.06 | V | 'OK'
808 | -12 V | Voltage | Nominal | -12.09 | V | 'OK'
875 | VBAT | Voltage | Nominal | 3.22 | V | 'OK'
942 | +3.3VSB | Voltage | Nominal | 3.36 | V | 'OK'
1009 | AVCC | Voltage | Nominal | 3.38 | V | 'OK'
1076 | Chassis Intru | Physical Security | Nominal | N/A | N/A | 'OK'
1143 | PS Status | Power Supply | N/A | N/A | N/A | 'Presence detected' 'Unrecognized Event = 0100h' 'Unrecognized Event = 0200h' 'Unrecognized Event = 0400h' 'Unrecognized Event = 0800h' 'Unrecognized Event = 1000h' 'Unrecognized Event = 2000h' 'Unrecognized Event = 4000h'
#
# bmc-info
Device ID : 32
Device Revision : 1
Device SDRs : unsupported
Firmware Revision : 2.50
Device Available : yes (normal operation)
IPMI Version : 2.0
Sensor Device : supported
SDR Repository Device : supported
SEL Device : supported
FRU Inventory Device : supported
IPMB Event Receiver : supported
IPMB Event Generator : supported
Bridge : unsupported
Chassis Device : supported
Manufacturer ID : Super Micro Computer Inc. (47488)
Product ID : 1541
GUID : 00000000-0000-0000-0000-000000000000
Channel Information
Channel Number : 0
Medium Type : IPMB (I2C)
Protocol Type : IPMB-1.0
Active Session Count : 0
Session Support : session-less
Vendor ID : Intelligent Platform Management Interface forum (7154)
Channel Number : 1
Medium Type : 802.3 LAN
Protocol Type : IPMB-1.0
Active Session Count : 0
Session Support : multi-session
Vendor ID : Intelligent Platform Management Interface forum (7154)
Channel Number : 3
Medium Type : Asynch. Serial/Modem (RS-232)
Protocol Type : IPMB-1.0
Active Session Count : 0
Session Support : single-session
Vendor ID : Intelligent Platform Management Interface forum (7154)
Channel Number : 5
Medium Type : IPMB (I2C)
Protocol Type : IPMB-1.0
Active Session Count : 0
Session Support : session-less
Vendor ID : Intelligent Platform Management Interface forum (7154)
#
Can you please add this ProductID to the list, let me know if you need additional info.
Best regards,
Alexander V.