[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Freeipmi-devel] Issue with Supermicro X8SIL
From: |
Albert Chu |
Subject: |
Re: [Freeipmi-devel] Issue with Supermicro X8SIL |
Date: |
Mon, 29 Aug 2011 11:24:19 -0700 |
Hey Andy,
Last I checked, IANA was no where near 47488 so I don't see how it could
be assigned to WinBond. FreeIPMI's ID->string array is generated off of
this:
http://www.iana.org/assignments/enterprise-numbers
As far as I can tell, all of Supermicro's motherboards use this strange
manufacturer ID, so I began supporting it as a special case. I'll ping
Supermicro again about changing it.
Al
On Mon, 2011-08-29 at 10:51 -0700, Andy Cress wrote:
> Hmmm. AFAIK, the 47488 IANA number was assigned to WinBond, so I
> believe the firmware vendor should be WinBond, but the system vendor
> in this case is SuperMicro, using the WinBond BMC. SuperMicro has
> used 4 different BMC vendors over time, by my count.
>
> However, the iana.org site has not posted this number, so that would
> be the official arbiter of the vendor name, when it is
> registered/posted.
>
> Andy
>
> -----Original Message-----
> From: address@hidden [mailto:address@hidden On Behalf Of Albert Chu
> Sent: Monday, August 29, 2011 12:45 PM
> To: Александр Воробьев
> Cc: address@hidden
> Subject: Re: [Freeipmi-devel] Issue with Supermicro X8SIL
>
> Just gotta add those motherboards. I'll have a new beta up sometime
> later today.
>
> Al
>
> On Mon, 2011-08-29 at 00:14 -0700, Александр Воробьев wrote:
> > Hi Al.
> >
> >
> > Great thanks, this update works fine.
> > Now I have the same issue with the following hardware:
> >
> >
> > Manufacturer: Supermicro
> > Product Name: X9SCL/X9SCM
> >
> >
> > Here what I got:
> >
> >
> > # ipmimonitoring --interpret-oem-data
> > ID | Name | Type | State | Reading |
> > Units | Event
> >
> >
> > 4 | System Temp | Temperature | Nominal | 31.00 | C
> > | 'OK'
> >
> >
> > 71 | CPU Temp | OEM Reserved | N/A | N/A | N/A
> > | 'OEM Event = 0000h'
> >
> >
> > 138 | FAN 1 | Fan | Nominal | 14580.00 | RPM
> > | 'OK'
> >
> >
> > 205 | FAN 2 | Fan | Nominal | 13635.00 | RPM
> > | 'OK'
> >
> >
> > 272 | FAN 3 | Fan | Nominal | 13635.00 | RPM
> > | 'OK'
> >
> >
> > 406 | FAN A | Fan | Nominal | 13500.00 | RPM
> > | 'OK'
> >
> >
> > 473 | Vcore | Voltage | Nominal | 1.00 | V
> > | 'OK'
> >
> >
> > 540 | 3.3VCC | Voltage | Nominal | 3.39 | V
> > | 'OK'
> >
> >
> > 607 | 12V | Voltage | Nominal | 12.14 | V
> > | 'OK'
> >
> >
> > 674 | VDIMM | Voltage | Nominal | 1.51 | V
> > | 'OK'
> >
> >
> > 741 | 5VCC | Voltage | Nominal | 5.09 | V
> > | 'OK'
> >
> >
> > 808 | -12V | Voltage | Nominal | -12.45 | V
> > | 'OK'
> > 875 | VBAT | Voltage | Nominal | 3.09 | V
> > | 'OK'
> > 942 | VSB | Voltage | Nominal | 3.36 | V
> > | 'OK'
> > 1009 | AVCC | Voltage | Nominal | 3.39 | V
> > | 'OK'
> > 1076 | Chassis Intru | Physical Security | Nominal | N/A | N/A
> > | 'OK'
> > 1143 | PS Status | Power Supply | N/A | N/A | N/A
> > | 'Presence detected' 'Unrecognized Event = 0100h' 'Unrecognized Event
> > = 0200h' 'Unrecognized Event = 0400h' 'Unrecognized Event = 0800h'
> > 'Unrecognized Event = 1000h' 'Unrecognized Event = 2000h'
> > 'Unrecognized Event = 4000h'
> > # bmc-info
> > Device ID : 32
> > Device Revision : 1
> > Device SDRs : unsupported
> > Firmware Revision : 1.08
> > Device Available : yes (normal operation)
> > IPMI Version : 2.0
> > Sensor Device : supported
> > SDR Repository Device : supported
> > SEL Device : supported
> > FRU Inventory Device : supported
> > IPMB Event Receiver : supported
> > IPMB Event Generator : supported
> > Bridge : unsupported
> > Chassis Device : supported
> > Manufacturer ID : Super Micro Computer Inc. (47488)
> > Product ID : 1572
> >
> >
> > GUID : 00000000-0000-0000-0000-000000000000
> >
> >
> > Channel Information
> >
> >
> > Channel Number : 0
> > Medium Type : IPMB (I2C)
> > Protocol Type : IPMB-1.0
> > Active Session Count : 0
> > Session Support : session-less
> > Vendor ID : Intelligent Platform Management Interface forum
> > (7154)
> >
> >
> > Channel Number : 1
> > Medium Type : 802.3 LAN
> > Protocol Type : IPMB-1.0
> > Active Session Count : 0
> > Session Support : multi-session
> > Vendor ID : Intelligent Platform Management Interface forum
> > (7154)
> >
> >
> > Channel Number : 3
> > Medium Type : Asynch. Serial/Modem (RS-232)
> > Protocol Type : IPMB-1.0
> > Active Session Count : 0
> > Session Support : single-session
> > Vendor ID : Intelligent Platform Management Interface forum
> > (7154)
> >
> >
> > Channel Number : 5
> > Medium Type : IPMB (I2C)
> > Protocol Type : IPMB-1.0
> > Active Session Count : 0
> > Session Support : session-less
> > Vendor ID : Intelligent Platform Management Interface forum
> > (7154)
> > #
> >
> >
> > Your help will be greatly appreciated.
> >
> >
> > Regards,
> > Alexander V.
> >
> >
--
Albert Chu
address@hidden
Computer Scientist
High Performance Systems Division
Lawrence Livermore National Laboratory