[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Freeipmi-devel] Issue with Supermicro X8SIL
From: |
Al Chu |
Subject: |
Re: [Freeipmi-devel] Issue with Supermicro X8SIL |
Date: |
Sun, 28 Aug 2011 09:40:36 -0700 |
Hi Alexander,
Great timing. I actually implemented support for this motherboard in
what will be the next release of FreeIPMI. This beta should have it:
http://download.gluster.com/pub/freeipmi/qa-release/freeipmi-1.0.6.beta1.tar.gz
You'll need to pass --interpret-oem-data on the command line to see it
interpret the OEM data (longer term you can set in /etc/freeipmi.conf to
avoid always typing it).
Al
On Sun, 2011-08-28 at 00:36 -0700, Александр Воробьев wrote:
> Hi Al,
>
>
> when querying a Supermicro X8SIL mainboard (IPMI Firmware Rev. 2.05) I
> have found an issue that the 'CPU1 Temp' and 'CPU2 Temp' OEM sensors
> cannot currently be interpreted:
>
>
> # ipmimonitoring
> ID | Name | Type | State | Reading |
> Units | Event
> 4 | System Temp | Temperature | Critical | -121.00 | C
> | 'At or Below (<=) Lower Non-Recoverable Threshold'
> 71 | CPU Temp | OEM Reserved | N/A | N/A | N/A
> | 'OEM Event = 0000h'
> 205 | FAN 2 | Fan | Nominal | 5025.00 | RPM
> | 'OK'
> 473 | CPU Vcore | Voltage | Nominal | 0.90 | V
> | 'OK'
> 540 | +3.3VCC | Voltage | Nominal | 3.38 | V
> | 'OK'
> 607 | +12 V | Voltage | Nominal | 11.82 | V
> | 'OK'
> 674 | CPU DIMM | Voltage | Nominal | 1.53 | V
> | 'OK'
> 741 | +5 V | Voltage | Nominal | 5.06 | V
> | 'OK'
> 808 | -12 V | Voltage | Nominal | -12.09 | V
> | 'OK'
> 875 | VBAT | Voltage | Nominal | 3.22 | V
> | 'OK'
> 942 | +3.3VSB | Voltage | Nominal | 3.36 | V
> | 'OK'
> 1009 | AVCC | Voltage | Nominal | 3.38 | V
> | 'OK'
> 1076 | Chassis Intru | Physical Security | Nominal | N/A | N/A
> | 'OK'
> 1143 | PS Status | Power Supply | N/A | N/A | N/A
> | 'Presence detected' 'Unrecognized Event = 0100h' 'Unrecognized Event
> = 0200h' 'Unrecognized Event = 0400h' 'Unrecognized Event = 0800h'
> 'Unrecognized Event = 1000h' 'Unrecognized Event = 2000h'
> 'Unrecognized Event = 4000h'
> #
>
>
> # bmc-info
> Device ID : 32
> Device Revision : 1
> Device SDRs : unsupported
> Firmware Revision : 2.50
> Device Available : yes (normal operation)
> IPMI Version : 2.0
> Sensor Device : supported
> SDR Repository Device : supported
> SEL Device : supported
> FRU Inventory Device : supported
> IPMB Event Receiver : supported
> IPMB Event Generator : supported
> Bridge : unsupported
> Chassis Device : supported
> Manufacturer ID : Super Micro Computer Inc. (47488)
> Product ID : 1541
>
>
> GUID : 00000000-0000-0000-0000-000000000000
>
>
> Channel Information
>
>
> Channel Number : 0
> Medium Type : IPMB (I2C)
> Protocol Type : IPMB-1.0
> Active Session Count : 0
> Session Support : session-less
> Vendor ID : Intelligent Platform Management Interface forum
> (7154)
>
>
> Channel Number : 1
> Medium Type : 802.3 LAN
> Protocol Type : IPMB-1.0
> Active Session Count : 0
> Session Support : multi-session
> Vendor ID : Intelligent Platform Management Interface forum
> (7154)
>
>
> Channel Number : 3
> Medium Type : Asynch. Serial/Modem (RS-232)
> Protocol Type : IPMB-1.0
> Active Session Count : 0
> Session Support : single-session
> Vendor ID : Intelligent Platform Management Interface forum
> (7154)
>
>
> Channel Number : 5
> Medium Type : IPMB (I2C)
> Protocol Type : IPMB-1.0
> Active Session Count : 0
> Session Support : session-less
> Vendor ID : Intelligent Platform Management Interface forum
> (7154)
> #
>
>
> Can you please add this ProductID to the list, let me know if you
> need additional info.
>
>
> Best regards,
> Alexander V.
--
Albert Chu
address@hidden
Computer Scientist
High Performance Systems Division
Lawrence Livermore National Laboratory