Re: [Freeipmi-devel] Issue with Supermicro X8SIL

[Albert Chu]

Hey Alexander,

This beta should have the X9SCL and X9SCM.  Same as before, need
--interpret-oem-data.  If you don't mind, could run w/
--output-sensor-state at the same time, so I can make sure the additions
in that area were also done correctly.

http://download.gluster.com/pub/freeipmi/qa-release/freeipmi-1.0.6.beta2.tar.gz

Thanks,

Al

On Mon, 2011-08-29 at 09:45 -0700, Albert Chu wrote:
> Just gotta add those motherboards.  I'll have a new beta up sometime
> later today.
> 
> Al
> 
> On Mon, 2011-08-29 at 00:14 -0700, Александр Воробьев wrote:
> > Hi Al. 
> > 
> > 
> > Great thanks, this update works fine. 
> > Now I have the same issue with the following hardware:
> > 
> > 
> > Manufacturer: Supermicro
> > Product Name: X9SCL/X9SCM
> > 
> > 
> > Here what I got:
> > 
> > 
> > # ipmimonitoring --interpret-oem-data
> > ID   | Name          | Type              | State    | Reading    |
> > Units | Event
> > 
> >                                                         
> > 4    | System Temp   | Temperature       | Nominal  | 31.00      | C
> > | 'OK'
> > 
> >                                                    
> > 71   | CPU Temp      | OEM Reserved      | N/A      | N/A        | N/A
> > | 'OEM Event = 0000h'
> > 
> >                                                   
> > 138  | FAN 1         | Fan               | Nominal  | 14580.00   | RPM
> > | 'OK'
> > 
> >                                                    
> > 205  | FAN 2         | Fan               | Nominal  | 13635.00   | RPM
> > | 'OK'
> > 
> >                                                    
> > 272  | FAN 3         | Fan               | Nominal  | 13635.00   | RPM
> > | 'OK'
> > 
> >                                                    
> > 406  | FAN A         | Fan               | Nominal  | 13500.00   | RPM
> > | 'OK'
> > 
> >                                                    
> > 473  | Vcore         | Voltage           | Nominal  | 1.00       | V
> > | 'OK'
> > 
> >                                                    
> > 540  | 3.3VCC        | Voltage           | Nominal  | 3.39       | V
> > | 'OK'
> > 
> >                                                    
> > 607  | 12V           | Voltage           | Nominal  | 12.14      | V
> > | 'OK'
> > 
> >                                                    
> > 674  | VDIMM         | Voltage           | Nominal  | 1.51       | V
> > | 'OK'
> > 
> >                                                    
> > 741  | 5VCC          | Voltage           | Nominal  | 5.09       | V
> > | 'OK'
> > 
> >                                                    
> > 808  | -12V          | Voltage           | Nominal  | -12.45     | V
> > | 'OK'
> > 875  | VBAT          | Voltage           | Nominal  | 3.09       | V
> > | 'OK'
> > 942  | VSB           | Voltage           | Nominal  | 3.36       | V
> > | 'OK'
> > 1009 | AVCC          | Voltage           | Nominal  | 3.39       | V
> > | 'OK'
> > 1076 | Chassis Intru | Physical Security | Nominal  | N/A        | N/A
> > | 'OK'
> > 1143 | PS Status     | Power Supply      | N/A      | N/A        | N/A
> > | 'Presence detected' 'Unrecognized Event = 0100h' 'Unrecognized Event
> > = 0200h' 'Unrecognized Event = 0400h' 'Unrecognized Event = 0800h'
> > 'Unrecognized Event = 1000h' 'Unrecognized Event = 2000h'
> > 'Unrecognized Event = 4000h'
> > # bmc-info
> > Device ID             : 32
> > Device Revision       : 1
> > Device SDRs           : unsupported
> > Firmware Revision     : 1.08
> > Device Available      : yes (normal operation)
> > IPMI Version          : 2.0
> > Sensor Device         : supported
> > SDR Repository Device : supported
> > SEL Device            : supported
> > FRU Inventory Device  : supported
> > IPMB Event Receiver   : supported
> > IPMB Event Generator  : supported
> > Bridge                : unsupported
> > Chassis Device        : supported
> > Manufacturer ID       : Super Micro Computer Inc. (47488)
> > Product ID            : 1572
> > 
> > 
> > GUID : 00000000-0000-0000-0000-000000000000
> > 
> > 
> > Channel Information
> > 
> > 
> > Channel Number       : 0
> > Medium Type          : IPMB (I2C)
> > Protocol Type        : IPMB-1.0
> > Active Session Count : 0
> > Session Support      : session-less
> > Vendor ID            : Intelligent Platform Management Interface forum
> > (7154)
> > 
> > 
> > Channel Number       : 1
> > Medium Type          : 802.3 LAN
> > Protocol Type        : IPMB-1.0
> > Active Session Count : 0
> > Session Support      : multi-session
> > Vendor ID            : Intelligent Platform Management Interface forum
> > (7154)
> > 
> > 
> > Channel Number       : 3
> > Medium Type          : Asynch. Serial/Modem (RS-232)
> > Protocol Type        : IPMB-1.0
> > Active Session Count : 0
> > Session Support      : single-session
> > Vendor ID            : Intelligent Platform Management Interface forum
> > (7154)
> > 
> > 
> > Channel Number       : 5
> > Medium Type          : IPMB (I2C)
> > Protocol Type        : IPMB-1.0
> > Active Session Count : 0
> > Session Support      : session-less
> > Vendor ID            : Intelligent Platform Management Interface forum
> > (7154)
> > # 
> > 
> > 
> > Your help will be greatly appreciated. 
> > 
> > 
> > Regards,
> > Alexander V.
> > 
> > 
-- 
Albert Chu
address@hidden
Computer Scientist
High Performance Systems Division
Lawrence Livermore National Laboratory