Re: Nokia 3220

[Felix Hammer]

Am Dienstag, 21. Dezember 2004 00:26 schrieb Joe Neeman:
> First of all, it's probably better to keep this on the list. That way if
> I can't help you, maybe someone else can.
>
sorry. i use the web-interface from 
http://lists.nongnu.org/archive/html/gnokii-users/ to answer you. i thought 
that i will be send to the list.
>
> Does this device exist? I had to unplug and re-plug the cable _after_
> inserting the usbserial and pl2303 modules in order to get it to show up
>
yes this already exists. should i make a symbolic link to /dev/gnokii?

> Try using gnokii from the command line instead of xgnokii. That way, it
> prints out a bunch of useful debugging information. Try "gnokii
> --identify".

i do gnokii --identify. i takes around 3 minutes to stop. this is the output:

..............................................................................
bash-2.05b# gnokii --identify
GNOKII Version 0.6.4
LOG: debug mask is 0x1
LOG: rlpdebug mask is 0x1
LOG: xdebug mask is 0x1
phone instance config:
model: 6510
port_device: /dev/tts/USB0
connection_type: 0
init_length: 0
serial_baudrate: 19200
serial_write_usleep: -1
hardware_handshake: 0
require_dcd: 0
smsc_timeout: 100
connect_script:
disconnect_script:
rfcomm_cn: 1
Connecting
Serial device: opening device /dev/tts/USB0
Serial device: setting speed to 115200
Serial device: setting RTS to low and DTR to low
Getting model...
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
Serial write: transmitter busy, waiting
Serial write: transmitter ready
SM_Block Retry - 0
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block Retry - 1
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block Retry - 0
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block Retry - 1
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block Retry - 0
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block Retry - 1
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
Serial device: opening device /dev/tts/USB0
Serial device: setting speed to 115200
Serial device: setting RTS to low and DTR to high
Getting model...
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block Retry - 0
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block Retry - 1
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block Retry - 0
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block Retry - 1
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block Retry - 0
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block Retry - 1
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
Serial device: opening device /dev/tts/USB0
Serial device: setting RTS to low and DTR to low
Serial device: setting RTS to high and DTR to high
Serial device: setting speed to 19200
Serial device: setting speed to 115200
Serial write: transmitter busy, waiting
Serial write: transmitter ready
[...]
Serial write: transmitter busy, waiting
Serial write: transmitter ready
Getting model...
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
Serial write: transmitter busy, waiting
Serial write: transmitter ready
SM_Block Retry - 0
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block Retry - 1
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block Retry - 0
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block Retry - 1
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block Retry - 0
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block Retry - 1
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
Identifying...
Message sent: 0x1b / 0x0005
00 01 00 00 41                                  |     A
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
Serial write: transmitter busy, waiting
Serial write: transmitter ready
SM_Block Retry - 0
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block Retry - 1
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block Retry - 0
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block Retry - 1
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block Retry - 0
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block Retry - 1
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
IMEI         : (unknown)
Manufacturer : Nokia
Modell       : (unknown)
Revision     : (unknown)
Serial device: closing device
bash-2.05b#                    
--------------------------------------------------------------------
is this correct so? 
gnocky also waits around 3 minutes. after this "nokia" as manufactor is found. 
but phonebook etc. is disabled.

greetings
felix