Re: Nokia 3220

[Joe Neeman]

> now i tried "model = AT" in ~/.gnokiirc

> model: AT
> port_device: /dev/tts/USB1

Is this right? Your previous email said /dev/tts/USB0.

> I'am using the cable "GS-AC101"!
> should i do something else in my gnokiirc if i set the model to "AT"?
> should i set something at the phone?
> 
> what can i do?

My config file:
port = /dev/tts/USB0
model = AT
initlength = default
connection = serial
use_locking = no
serial_baudrate = 19200
[connect_script]
TELEPHONE = 12345678
[disconnect_script]
[logging]
debug = on
rlpdebug = on
xdebug = off

This is what I get:
LOG: debug mask is 0x1
LOG: rlpdebug mask is 0x1
phone instance config:
model: AT
port_device: /dev/tts/USB0
connection_type: 0
init_length: 0
serial_baudrate: 19200
serial_write_usleep: -1
hardware_handshake: 0
require_dcd: 0
smsc_timeout: 100
connect_script:
disconnect_script:
rfcomm_cn: 1
Initializing AT capable mobile phone ...
Serial device: opening device /dev/tts/USB0
Serial device: setting RTS to high and DTR to high
Message sent: 0x00 / 0x0004
41 54 5a 0d                                     | ATZ
write: [ATZ<cr>]
read : [TZ<cr><cr><lf>OK<cr><lf>]

<snip>

IMEI         : 353780001594175
Manufacturer : Nokia
Model        : Nokia 3220
Revision     : V 03.30
Serial device: closing device