Re: Nokia 3220

[Felix Hammer]

Am Dienstag, 21. Dezember 2004 21:41 schrieb Joe Neeman:
> > model: 6510

now i tried "model = AT" in ~/.gnokiirc
>
> > Message sent: 0x1b / 0x0006
> > 00 01 00 07 01 00                               |
> > SM_Block Retry - 1
>
> You need to set the model as "AT" in order to get the 3220 working. It
> also only supports the commands used by the Nokia-extended AT protocol.
> You can send and receive calls and SMS, but I think that's about all.
> Joe

this is the output from gnokii --identify:

-------------------------------------------------------------
bash-2.05b# gnokii --identify
GNOKII Version 0.6.4
LOG: debug mask is 0x1
LOG: rlpdebug mask is 0x1
LOG: xdebug mask is 0x1
phone instance config:
model: AT
port_device: /dev/tts/USB1
connection_type: 0
init_length: 0
serial_baudrate: 19200
serial_write_usleep: -1
hardware_handshake: 0
require_dcd: 0
smsc_timeout: 100
connect_script:
disconnect_script:
rfcomm_cn: 1
Initializing AT capable mobile phone ...
Serial device: opening device /dev/tts/USB1
Serial device: setting RTS to high and DTR to high
Message sent: 0x00 / 0x0004
41 54 5a 0d                                     | ATZ
write: [ATZ<cr>]
Message sent: 0x00 / 0x0005
41 54 45 31 0d                                  | ATE1
write: [ATE1<cr>]
Message sent: 0x00 / 0x000a
41 54 2b 43 4d 45 45 3d 31 0d                   | AT+CMEE=1
write: [AT+CMEE=1<cr>]
Message sent: 0x06 / 0x0008
41 54 2b 43 47 4d 4d 0d                         | AT+CGMM
write: [AT+CGMM<cr>]
Initialization failed (11)
Telephone interface init failed: Command timed out.
Quitting.
-------------------------------------------------------------------------

I'am using the cable "GS-AC101"!
should i do something else in my gnokiirc if i set the model to "AT"?
should i set something at the phone?

what can i do?

greetings 
felix