[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [gpsd-dev] refclock 28 gone wacky on me
From: |
Hal Murray |
Subject: |
Re: [gpsd-dev] refclock 28 gone wacky on me |
Date: |
Thu, 09 Jun 2016 20:46:58 -0700 |
address@hidden said:
> That's odd. The normal semtence budget including GPGSV should fit inside a
> second. Are you getting some kind of $PMTK thing that pushes it over?
I'm using gpsmon to watch the output. There is a pause every second. That's
measuring by eyeball.
Here is a typical second:
------------------------------------- PPS ------------------------------------
-
(49) $GPGSA,A,3,25,05,29,21,20,,,,,,,,2.7,1.6,2.2*38
(70) $GPGSV,3,1,12,20,78,095,26,29,72,090,28,21,51,288,20,04,41,290,20*7F
(68) $GPGSV,3,2,12,18,36,210,,05,32,047,26,25,28,190,14,26,28,306,07*7B
(64) $GPGSV,3,3,12,15,24,131,,13,19,093,,16,08,326,,31,00,258,22*7E
(72) $GPRMC,034045.787,A,3726.0553,N,12212.2633,W,004.3,175.6,100616,,,A*75
(40) $GPVTG,175.6,T,,M,004.3,N,008.0,K,A*07
That's running direct. If I go through gpsd the PPS line has a time but the
pause is always there.
There is a GPGGA listed up high in the Sentences block but I haven't seen one.
--
These are my opinions. I hate spam.
- Re: [gpsd-dev] refclock 28 gone wacky on me, (continued)
- Re: [gpsd-dev] refclock 28 gone wacky on me, Gary E. Miller, 2016/06/09
- Re: [gpsd-dev] refclock 28 gone wacky on me, Mike, 2016/06/09
- Re: [gpsd-dev] refclock 28 gone wacky on me, Gary E. Miller, 2016/06/09
- Re: [gpsd-dev] refclock 28 gone wacky on me, Frank Nicholas, 2016/06/09
- Re: [gpsd-dev] refclock 28 gone wacky on me, Eric S. Raymond, 2016/06/09
- Re: [gpsd-dev] refclock 28 gone wacky on me,
Hal Murray <=
- Re: [gpsd-dev] refclock 28 gone wacky on me, Gary E. Miller, 2016/06/09
- Re: [gpsd-dev] refclock 28 gone wacky on me, Hal Murray, 2016/06/10
- Re: [gpsd-dev] refclock 28 gone wacky on me, Eric S. Raymond, 2016/06/10
- Re: [gpsd-dev] refclock 28 gone wacky on me, Hal Murray, 2016/06/10
- Re: [gpsd-dev] refclock 28 gone wacky on me, Eric S. Raymond, 2016/06/10
- Re: [gpsd-dev] refclock 28 gone wacky on me, Hal Murray, 2016/06/10
- Re: [gpsd-dev] refclock 28 gone wacky on me, Gary E. Miller, 2016/06/10
- Re: [gpsd-dev] refclock 28 gone wacky on me, Mike, 2016/06/19
- Re: [gpsd-dev] refclock 28 gone wacky on me, Gary E. Miller, 2016/06/19
- Re: [gpsd-dev] refclock 28 gone wacky on me, Mike, 2016/06/19