[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [avrdude-dev] ATMega2560 and stk500
From: |
Alan Horstmann |
Subject: |
Re: [avrdude-dev] ATMega2560 and stk500 |
Date: |
Mon, 20 Jan 2014 12:01:14 +0000 |
User-agent: |
KMail/1.9.1 |
On Sunday 08 December 2013 22:14, Alan Horstmann wrote:
<snip>
> Hopefully this is much closer to a correct solution here - so I would
> appreciate review comments etc and consideration for inclusion. Then
> stk500 could perhaps be added to the list of ISPs that work with the
> Mega2560?
>
> With this patch applied, programming either half of the Mega2560 256K flash
> works correctly with an stk500 (v1) ISP.
Is it possible/likely this could be looked at? Whilst working on other
things, I have kept the logic analyser setup/connected in order to re-test
alternatives if needed. However, soon I will need to strip that down for
other uses.
This will continue to catch users since it affects a standard Arduino Mega
board (which has a bootloader bug - so is often re-flashed) when using the
simple 'one-arduino-to-re-flash-another' approach (ArduinoISP sketch).
Regards
Alan
- Re: [avrdude-dev] ATMega2560 and stk500,
Alan Horstmann <=
- Re: [avrdude-dev] ATMega2560 and stk500, Joerg Wunsch, 2014/01/21
- Re: [avrdude-dev] ATMega2560 and stk500, Alan Horstmann, 2014/01/21
- Re: [avrdude-dev] ATMega2560 and stk500, Joerg Wunsch, 2014/01/22
- Re: [avrdude-dev] ATMega2560 and stk500, Alan Horstmann, 2014/01/22
- Re: [avrdude-dev] ATMega2560 and stk500, Joerg Wunsch, 2014/01/22
- Re: [avrdude-dev] ATMega2560 and stk500, Alan Horstmann, 2014/01/22
- Re: [avrdude-dev] ATMega2560 and stk500, Joerg Wunsch, 2014/01/22