[Mldonkey-users] NetBSD 100% Cpu

[Karsten Kruse]

Hi,

after some Minutes Mldonkey begins to use the full CPU. This is on a 
Duron 1300, it runs now for a Day so i guess it will not stop ;). If i 
kill mldonkey and start it again i have 10 good minutes.

I use MLDonkey 2.02-0 static.

This is what ktruss (something like strace i guess) says:

   587 mldonkey poll(0x831b400, 0x29, 0x1a)        = 1
   587 mldonkey gettimeofday(0xbfbfba18, 0)        = 0
   587 mldonkey accept(0x18, 0xbfbfb990, 0xbfbfb96c) Err#24 EMFILE
   587 mldonkey gettimeofday(0xbfbfba18, 0)        = 0
   587 mldonkey poll(0x831b400, 0x29, 0x18)        = 1
   587 mldonkey gettimeofday(0xbfbfba18, 0)        = 0
   587 mldonkey accept(0x18, 0xbfbfb990, 0xbfbfb96c) Err#24 EMFILE
   587 mldonkey gettimeofday(0xbfbfba18, 0)        = 0
   587 mldonkey poll(0x831b400, 0x29, 0x15)        = 1
   587 mldonkey gettimeofday(0xbfbfba18, 0)        = 0
   587 mldonkey accept(0x18, 0xbfbfb990, 0xbfbfb96c) Err#24 EMFILE
   587 mldonkey gettimeofday(0xbfbfba18, 0)        = 0
   587 mldonkey poll(0x831b400, 0x29, 0x12)        = 1
   587 mldonkey gettimeofday(0xbfbfba18, 0)        = 0
   587 mldonkey accept(0x18, 0xbfbfb990, 0xbfbfb96c) Err#24 EMFILE
   587 mldonkey gettimeofday(0xbfbfba18, 0)        = 0
   587 mldonkey poll(0x831b400, 0x29, 0x10)        = 1
   587 mldonkey gettimeofday(0xbfbfba18, 0)        = 0
   587 mldonkey accept(0x18, 0xbfbfb990, 0xbfbfb96c) Err#24 EMFILE
   587 mldonkey gettimeofday(0xbfbfba18, 0)        = 0

... and so on.

Any ideas what i can do to debug this?

Karsten