Re: [STUMP] Re: Weird behavior with XRandR and two screens

[Joeli Hokkanen]

On 07:48 Tue 10 Mar     , Michael Raskin wrote:
> Joeli Hokkanen wrote:
> > I uncommented the virtual line after that and set up .xsession with my
> > intended setup, but it didn't work either. About half of the time I was
> > at the ``normal'' environment where everything was still just one big 
> > screen, and at other times only the VGA monitor worked while the DVI 
> > monitor went nuts at every trace of movement.
> > 
> > I'm out of ideas on what could be wrong. Any help would be greatly
> > appreciated.
> 
> What does "xrandr -q" say when you enable "Virtual" line?

I got this message to my personal mailbox instead through the mailing
list, but I'll reply to the mailing list as it obviously is relevant to
my problem.

~ % xrandr -q
Screen 0: minimum 320 x 200, current 2720 x 1024, maximum 2720 x 1024
VGA connected 1280x1024+0+0 (normal left inverted right x axis y axis) 
338mm x 270mm
   1280x1024      60.0*+   75.0     60.0     60.0* 
   1280x960       60.0  
   1152x864       75.0     75.0  
   1024x768       75.1     75.0     70.1     60.0  
   832x624        74.6  
   800x600        72.2     75.0     60.3     56.2  
   640x480        75.0     72.8     75.0     60.0     59.9  
   720x400        70.1  
TMDS-1 connected 1440x900+1280+0 (normal left inverted right x axis y 
axis) 408mm x 255mm
   1440x900       59.9*+   60.0  
   1280x1024      75.0     60.0     60.0  
   1280x960       60.0     60.0  
   1152x864       75.0     75.0  
   1024x768       75.1     75.0     70.1     60.0  
   832x624        74.6  
   800x600        72.2     75.0     60.3     56.2  
   640x480        75.0     72.8     75.0     60.0     59.9  
   720x400        70.1  

Regards,
  Joeli